GMC 2003 Yukon XL Owner'S Manual Download Page 45

Page: 45 / 518

Lap-Shoulder Belt

Here’s how to wear a lap-shoulder belt properly.

1. Pick up the latch plate and pull the belt across you.

Don’t let it get twisted.

2. Push the latch plate into the buckle until it clicks.

Pull up on the latch plate to make sure it is secure.

When the shoulder belt is pulled out all the way,
it will lock. If it does, let it go back all the way and
start again.

If the belt is not long enough, see

Safety Belt

Extender on page 1-43.

Make sure the release button on the buckle is
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

3. To make the lap part tight, pull down on the buckle

end of the belt as you pull up on the shoulder part.

1-39

Summary of Contents for 2003 Yukon XL







































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands

GMC 2003 Yukon XL, Owner'S Manual

Search results

Summary of Contents for 2003 Yukon XL

Reviews:

Related manuals for 2003 Yukon XL

Brands by name

Popular brands