32
flows, switch the device back to "spray"
mode.
7.4.1 Operation with the "4 in 1
nozzle"
Combine the set pressure with the "4 in 1
nozzle". We recommend the following
settings, for example:
+
= cleaning of larger
areas that are
moderately dirty
+
+
= cleaning of larger
areas that are very
dirty
+
= spot cleaning that
are very dirty
ATTENTION
Ensure that you are standing firmly since
the water jet can produce a greater or lesser
degree of recoil force at the device
(depending on the operating mode that
was selected). Always hold the spray gun
and spray pipe firmly with both hands.
ATTENTION
The high pressure can cause damage! If the
water pressure is too high, it can damage
the surfaces. Maintain a distance of at least
30 cm from painted surfaces. Do not clean
delicate surface with the turbo mill (e.g.
wood, tires, painted surfaces, etc.).
Switch on the spray jet by pressing the
trigger
(L)
in the handle of the spray gun
(N)
and start cleaning.
NOTE!
Press the PowerControl button
(M)
for eas-
ier and less strenuous work. This signifi-
cantly reduces the resistance on the trigger
(L)
!
7.4.2 Operation with the sprinkler
attachment
-
Attach the sprinkler
(J)
for plant and
garden irrigationand start watering.
= Sprinkler
Combine the set pressure with the sprin-
kler
(J)
. We recommend the following
settings, for example:
+
= Watering plants
7.4.3 Work interruptions
If you need to stop working, release the
trigger
(L)
on the spray gun
(N)
and lock
the trigger
(L)
.
This will switch off the pump in the
but the device will
remain ready for operation. If the device is
not used for longer than 5 minutes, the
will switch to standby
mode (indicators flashes green).
To switch on the
again, unlock and then press the trigger
(L)
on the spray gun
(N)
. The device will
continue operating in the most recently
selected setting.
If the device is not used for longer than
30 minutes, it will switch off. To restart
the device, press the ON/OFF-switch
(A)
. The device then starts in “spray”
mode.
7.4.4 Battery status indicator
The device is equipped with a battery
charge indicator
(B)
that displays the
charging status of the battery. The dis-
plays only light up when the device is
switched on.
Battery capacity:
Reserve ≤ 30% ≤ 60% 100%
Temperature protection
Low voltage cutoff:
The indicator
(B)
will flash green shortly
before the low voltage cutoff device
switches off the device. If the low voltage
cutoff device switches off the device, all
four indicators
(B)
will flash green.
spray eco clean
15
spray eco clean
18
17
spray eco clean
19
16
max
max
max
max
max
max
max
GB
RZ_MULTIJET_36V.qxp_Text_GB 28.01.21 11:13 Seite 32
