26
In order to prevent damage and
hazards resulting from improper
use
, you must observe the user
manual and store it in a safe place!
Wear suitable work clothing such as
safety goggles, long trousers and, if
necessary, gloves during cleaning. Do
not work barefoot or in light sandals.
Aerosols can be formed when using
highpressure cleaners. Inhaling
aerosols can be harmful for your
health. Depending on the
environment to be cleaned, wear a
suitable respiratory protective mask
of class FFP 2 or comparable to
protect yourself from inhaling
aerosols if the use of a fully shielded
nozzle is not possible.
If the device is passed on to other
persons, they must also be given the
user manual!
Only use GLORIA original spares and
accessories for the device.
Never use worn, modified or defec-
tive replacement parts / accessories!
2.2 Safety instructions for
handling charger and the device
DANGER
DANGER OF ELECTRIC SHOCK!
Contact with energised cables/wires
or components may result in serious
injury or death! You should therefore
observe the following safety
instructions:
Mains voltage must be in compliance
with voltage specification (V~) on
type plate of charger!
The mains plug and coupling of the
extension cable must be water tight
and may not be placed in water. The
coupling may not be on the floor.
Use cable drums to ensure that the
sockets are at least 60 mm above the
floor. All live parts in the work area
must be protected against water jets.
The battery voltage must match the
battery charging voltage of the bat-
tery charger.
Children and persons with reduced
physical, mental or sensory capabilities
or who are lacking the requisite knowl-
edge and experience are not allowed to
use the charger.
If the power cord of the charging
station is damaged, you must com-
pletely replace the charger!
Only connect the charging station to
alternating current.
DANGER
RISK OF INJURY FROM ELECTRIC SHOCK,
AS WELL AS RISK OF FIRE AND EXPLO-
SION! To avoid life-threatening situa-
tions:
ensure that charger, charging plug
and mains plug are in proper work-
ing condition before use.
the contacts must never be touched.
do not cover the ventilation slots of the
charger. Otherwise, the charger can
overheat and will not function properly.
protect charger as well as
against heat and
humidity exposure.
do not immerse charger or
in fluid.
use charger only to charge
.
keep charger as well as
sealed.
never operate charger on a
flammable surface.
never perform charging near easily
inflammable substances.
protect
against
heat, permanent sunlight and fire
exposure. Store
only at a temperature range between
0 °C to max. +45 °C. Never place
on a radiator.
should the device be operated using a
residual-current-operated protective
device (RCD) with a trigger current of
max. 30 mA. Ask your electrician!
CAUTION
RISK OF INJURY FROM CAUSTIC LIQ-
UIDS OR VAPOURS! Never expose
to extreme condi-
tions, such as heat and impact. There is
max. 45 °C
GB
RZ_MULTIJET_36V.qxp_Text_GB 28.01.21 11:04 Seite 26
