29
5 Unpacking
Figures
-
Your device is supplied pre-assembled.
The loose parts that are included must
be installed accordingly, depending on
the application.
6 Prior to initial commissioning
WARNING
BEFORE USE OBSERVE CHAPTER 2 “FOR
YOUR SAFETY”.
You should aslo note the following
safety instructions:
The mains voltage must be in compli-
ance with the voltage specification
(V~) on the type plate of the charger.
Use only the supplied charger.
Operate charger only in dry rooms.
NOTE!
The battery, integrated in
,
is only partially
charged. Before initial use, fully charge
battery. Please ensure that the charging
procedure is performed at room tem-
1
2
4 Technical data
Set – Item number(s): 000320.0000
Battery (inside, non-replaceable)
Type: Lithium-ion
Nominal voltage: 36.0 V
Rating: 4.0 Ah
Charging station (GLORIA DC 42 V / 2,1 A)
Input voltage: 220-240 V~ / 50/60 Hz
Output voltage: 42 V / DC / 2100 mA
Power: 90 W
Battery charging time: 120 Min.
Per. charging temp. range: 0 – + 45 °C
Protection class: II
Pressure: 0.5 MPa (5,0 bar) / 2.5 MPa
(25 bar) / 4.6 MPa (46 bar)
Water connection: 3/8" waterhose / coupling
max. inlet temperature: 30 °C
max. inlet pressure: Pin = 5 Bar / 0.5 MPa
*Pin max = 10 Bar / 1.0 MPa
*Use pressure reducer
max. suction head : 2.0 m, suction duration when using
1/2" hose approx. 22 seconds
max. suction head : 2.0 m, suction duration when using
3/8" hose approx. 11.0 seconds
max. length suction hose: 5.0 m
Device weight with lance and "4 in 1 nozzle": 5.0 kg
Operating time when fully charged
- Operating mode “clean“ + needle/ flat jet nozzle/
turbo mill: approx 18 Min.
Hand-Arm vibration value: < 0.478 m/s
2
(+/- 0.545 m/s
2
)
Measured pressure level LPA: 72.0 dB; k = 3.0 dB(A)
Guaranteed sound power level LWA: 85 dB(A)
GB
RZ_MULTIJET_36V.qxp_Text_GB 28.01.21 11:04 Seite 29
