REV. 01 2020
26 / 28
CHAPTER 8 – MAINTENANCE
8.1 GENERAL WARNINGS
Unauthorized personnel may not carry out maintenance work.
•
Regular maintenance as described in the manual is essential for correct operation and long
lifetime of the machine.
•
If maintenance is not carried out regularly, the operation and reliability of the machine may be
compromised.
Before carrying out any maintenance work, disconnect the electric supply.
Do not clean the machine with compressed air or jet of water.
•
Defective parts must be replaced exclusively by expert personnel using the manufacturer’s
parts.
•
Removing or tampering with safety devices is extremely forbidden.
In particular, the Manufacturer shall not be held responsible for complaints
deriving from the use of spare parts made by other manufacturers or for
damage caused by tampering or removal of safety systems.
8.2
ORDINARY MAINTENANCE
This balancer requires only minor maintenance to keep the machine operating properly.
•
Keep the area around the machine clear.
•
Keep the display clean and clear. Use a vaporizing cleaner only. Do not use cleaners or the
solvents which leave oil or firmly residues behind.
•
Keep the adaptors, cones, thread shaft, pressure cup, and the quick locking nut clean. Grease
and dirt buildup will cause inaccurate balancing and premature wear. Clean these items at once
a day using a vaporizing solvent.
•
Clean the weight tray, the cone holders and accessories using a vaporizing solvent. Weights
stored in a dirty tray may pick up grease and dirt which may keep them from attaching to the
wheel securely.
