REV. 01 2020
17 / 28
6.4.3 STANDARD ALU MODE
All the ALU modes are dynamic balance. Choose the option that best fits the available locations as
shown in the figure 18
From the measurement screen, press to select the modes
ALU1 ALU2 ALU3
ALU4.
Fig. 18
Hidden adhesive weights can be applied by the pusher on the automatic gauge,
as shown in the figure 19.
When the rim is rotated to inner unbalanced position under ALU1 and ALU2
mode, the laser pointer is actuated to point to 6 o’clock adhesive position.
Fig. 19
Balancing of light alloy rims with
application of adhesive weights on the
rim shoulders.
Both weight positions are at 6 o’clock.
Balancing of light alloy rims with
hidden application of adhesive weights.
Both weight positions are at 6 o’clock.
Combination application: clip-on weight
inside at 12 o’clock and hidden adhesive
weight on outside at 6 o’clock.
Outer weight position is same as ALU2.
Combination application: clip-on weight
inside at 12 o’clock and adhesive weight
on outside at 6 o’clock.
Outer weight position is same as ALU1.
Location for hidden adhesive weight
