REV. 01 2020
16 / 28
6.4
BALANCING MODE
6.4.1 DYNAMIC MODE
The dynamic mode is used for most passenger and light truck wheels using the most common location
for corrective weights. Clip-on weights are placed on the inner and outer sides of the rim at 12 o’clock
position.
On the initial screen press
Fig. 16
Correction of outer side Correction of inner side
6.4.2 STATIC MODE
The static mode is used for motorcycles or narrow wheels when it is not possible to place the
counterweights on both sides of the rim. Clip a single weight at 12 0’clock position on one of sides of
the rim or in centre of wheel according to the diameter of the wheel mounted.
Press to select “Static mode”.
When the LED indicator STA lights up and then press
Fig. 19
Fig. 17
