NOTE:
Wi-Fi signal range covers an area of approx. 100 feet in diameter in an
open area
Set up 4G mobile data connectivity
Global Payments Terminal supports 4G wireless, and will automatically
choose the best available network. If you have ordered a 4G configuration,
Global Payments will insert and program the network SIM Card for your
terminal before shipment.
There is no setup required by you
.
The terminal will automatically connect to the mobile data network after
powering up. It may take a few minutes to connect, depending on the
network signal in the area. The Mobile Data network, if being used, will
display at the top right of the terminal screen. Once connected, the icon
will be filled up. If the icon remains empty or no SIM card symbol, the
mobile data network is not connected.
Always make sure the terminal is connected with the mobile data network
before performing any transactions.
Set up Wi-Fi communication base
connectivity
There are two different optional bases for the Global Payments Terminal
S1000F/S1000E – a
Wi-Fi with ethernet communication base (or
referred to as Wi-Fi comm base)
and a
charging base
. This set-up guide
is only applicable to the Wi-Fi comm base.
The
Wi-Fi comm base
works as the Wi-Fi access point when an ethernet
cable is plugged into the port. Each S1000F/S1000E will require one
dedicated comm base to utilize the ethernet connectivity.
In typical indoor usage, the network range for terminals and their Wi-Fi
comm bases are up to 100 feet.
NOTE:
There is no ethernet/Wi-Fi network connectivity function when using
the
charging base
only. Different from the Wi-Fi comm base, the
charging base is only used strictly for charging.
© 2021 Global Payments Inc. All Rights Reserved.
SM212162V2.1EN
16
