Globaljig KOALA, User Manual

Page: 23 / 57

GLOBALJIG INTERNATIONAL S.r.l.
23
e. Operations to be performed for loading the vehicle upon the lift

Lower the lift completely.

Position the vehicle upon the lift, centring it as much as possible and making use of the D542 lifting pads.
! ! ! DANGER ! ! !
The vehicles to be lifted must not have any people and/or additional loads on board.
D542
Fig. 5.2
f. Use of the towing arm

Perform the towing arm’s installation procedure, as described in section 4.4.

Connect the chain’s hook to the part of the vehicle to be used for towing.

Turn the horizontal arm to the desired position and use the appropriate pin to block one of the two connecting rods.

Connect the appropriate safety cable.

Activate the cylinder, using the external pump, to pull the chain.
! ! ! DANGER ! ! !
Once the arm and the chain have been properly positioned,
make sure that nobody is in the immediate vicinity of the arm,
especially behind it, before initiating the towing operation.
5.4. Adjustments
The lift does not require any types of adjustments during its installation and operating procedures.