Globaljig KOALA, User Manual

Page: 21 / 57

GLOBALJIG INTERNATIONAL S.r.l.
21
5. INSTRUCTIONS FOR USE
5.1. Introductory notes
For its proper use, the KOALA LP requires a single operator in possession of Qualification 1.
Given the LP’s functionality type, the operations that the operator is required to perform upon the LP are
extremely simple. When using the LP, or rather while vehicle raising and lowering operations are being carried
out, the user must always remain at a safe distance (at least 1.5 m) from the LP, controlling its movements
from the mobile button panel.
! DANGER ! ! !
While raising and lowering manoeuvres are being carried out,
the above mentioned safety distance will ensure greater operator safety
in the event that any objects or the load itself should fall from the LP
! ! ATTENTION! !
GLOBALJIG shall bear no responsibility for any damages
in the event that the instructions contained within this manual are not respected.
! DANGER ! ! !
Before performing any raising or lowering manoeuvres, the operator must
always make sure that at least 50 cm of free space is available
between every mobile part of the LP, or the vehicle being lifted,
and the other fixed or mobile surrounding structures.
! DANGER ! ! !
The vehicles to be lifted must not have any people or additional loads on board.
5.2. Command and control devices
The KOALA lift’s command and control devices are illustrated in fig. 5.1 below and are described in the relative
legend.
Fig. 5.1
Green indicator light (turns on
when the main switch is in its “I”
position) 3. Main electrical switch
Emergency button
6. Raise button
5. Lower button
Safety deactivation button