1.8. To Use Store/Utility/Help Function
As is shown in Figure 1- 19, there are three buttons on the operation panel,
which are used to call the store/recall, utility and help function. The instruction
below will help you familiarize with these functions.
Figure 1- 19 Store/Recall Utility and Help Button
1. The Store/Recall button is used to store waveform data and configure
information.
2. The Utility button is used to set the auxiliary system function, change the
output configure parameters, interface setting, system setting information
or perform the instrument self-test and read the calibration information, etc.
3. The Help button is used to read the help information.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
