Figure 2- 10 Table2- 3 Menu Explanations of Ramp Waveform
To Set the Symmetry
1. Press
Ramp
→
Symmetry, to set the symmetry.
The symmetry shown on the screen when the instrument is powered is the
default value or the set value beforehand. When changing the function, if
the current value is valid for the new waveform, it will be used sequentially.
Function
Menu
Settings Explanation
Freq/
Period
Set the signal frequency or period;
The current parameter will be switched at a
second press.
Ampl/
HLevel
Set the signal amplitude or high level;
The current parameter will be switched at a
second press.
Offset/
LLevel
Set the signal offset or low level;
The current parameter will be switched at a
second press.
Phase
Set the phase of the signal;
Symmetry
Set the symmetry for ramp waveform.
Term Explanation:
Symmetry:
The percentage that the rising period takes up the whole Period.
Input Range:
0~100%.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
