2.4. To Set Pulse Signals
Press Pulse button to call the pulse operation. The pulse waveform parameters
are set by using the pulse operation menu.
The parameters for pulse waveforms are: frequency/period, amplitude/high
level, offset/low level, pulse width/Duty and Rise/Fall. As is shown in Figure 2-
12, in the soft key menu, select PulWidth. Cursor is located in the pulse width
parameter area in the parameter display window, and users can set the pulse
width value here.
Figure 2- 12 Pulse Parameter Display Interface
www.
GlobalTestSupply
.com
Find Quality Products Online at:
