15
– Employee Setup
Employee identifications and names help to track the transactions
processed by each employee. Employee IDs must be between one (1)
and five (5) digits long and must be pre-registered on the terminal.
Employee names can be between 1 and 20 alphanumeric characters
long. The terminal is pre-configured for employee IDs 1
–99. Each
EMPLOYEE ID is also assigned a password, which must be a numerical
password that is five to ten (5-10) digits long.
To access the EMPLOYEE ID configuration, the manager level
password is required.
The employee configuration table can be accessed from the main menu
by pressing
MENU
until
Employee Setup
is displayed.
Select
Employee Setup
by pressing the appropriate function key or from the
main menu
by pressing the number “7” key. Enter in your supervisor
password.
Using the employee setup allows you to do the following activities:
Log On Employee
Initiates the employee log-on process
Log Off Employee
Initiates the employee log-off process
Add Employee
Initiates the add employee process
Modify PW
Initiates the modify employee password
Modify Name
Initiates the modify employee name that appears on the
receipt
Delete Employee
Initiates the delete employee information process
Clear Employees
Initiates the clear all employees process
To add or modify an employee name, a combination of numeric
keystrokes and the “
ALPHA
” key (located at the bottom centre of the
screen) is used.
