5.4 REMOVAL OF THE REAR PLATE
The rear plate does not need to be removed for ac-
cess to other parts for work. The following proce-
dure is only for replacing with a new one.
Remove the wheels cover [see 5.3].
Close up the frame of the cover, tightening the fixing
nut (1).
Detach the electrical connections from the “grass-cat -
cher attached” microswitch (2) and the “grass-catcher
full” microswitch (3) and release the stop ca ble (4).
The plate is hinged at the base of the machine’s
frame by two small plates (5), each of which is fixed
by four screws (6), and is attached to the frame of the
wheels cover by four screws (7).
First of all, undo the four upper screws (7) and then
dismantle the two lower plates (5), ensuring that the
wheels cover frame has the necessary stability since,
by removing the plate, it is without support at the
back.
3/2015
72FL hydro
5.4
.
0
REMOVAL OF THE REAR PLATE
1 / 2
쑮
쑮
쑱
쑱
WORKSHOP MANUAL
pag.
MODEL YEAR 2016
© by GLOBAL GARDEN PRODUCTS
6
5
3
4
2
1
<= ...BACK... <=
