© by GLOBAL GARDEN PRODUCTS
72FL hydro
i
.
2
INDEX
씱
씱
씱
씱
1 / 2
쑮
쑮
쑱
쑱
WORKSHOP MANUAL
pag.
MODEL YEAR 2016
CONTENTS
1. Rules and procedures for Service Centres
This chapter covers all the main aspects of the re -
lationship between the manufacturer and the ser -
vice centres.
A close collaboration between the manufacturer
and the service centres is conclusive for solving
pro blems in the most effective way as well as
maintaining an image of efficiency and reliability.
Compliance with these brief and simple guideli nes
will facilitate this task and prevent general mi -
sunderstandings and time-wasting for both the
manufacturer and the service centre.
2. General and safety regulations
This chapter covers the main aspects of a servic-
ing procedure and the general rules for guaran-
teeing a successful service which protects the en-
vironment and respects the safety of both the
serviceman and the user of the apparatus.
3. Maintenance
This chapter deals with the criteria for routine
main ten ance.
4. Adjustments and tuning
This chapter deals with the adjustments to be ma -
de to remedy the more frequent performance fai -
lures and are usually resolved by quick checks and
tunings.
5. Removal of external parts and main
assemblies
For doing more difficult jobs, greater accessibility
may be required. This can be done by taking the
unit concerned off and working at the bench, or by
removing the cover or other external parts.
Whether or not this will be useful is at the discre-
tion of the mechanic’s experience.
6. Repairs
This chapter deals with all the more complex work
connected with the replacement or repair of mal-
functioning or worn parts.
The descriptions must follow a logical sequence-
and can include operations not specifically con-
nected to a particular type of repair.
In this case, careful reading of the entire procedure
can help you omit all those operations not con-
nected with the case in hand without, howe ver,
overlooking anything that may be necessary.
7. Electrical system
This chapter deals with the problems and checks
con nect ed with the electrical system.
All work can be done using a tester without hav-
ing to use special equipment.
The electrical diagrams can be useful to you for
understanding how the system functions and to fa-
cilitate the pinpointing of any problems.
8. Technical specifications
This chapter summarises all the main information
re garding the machine.
3/2016
GENERAL INDEX
1.1
0
Identification and procedures
2.1
0
Safety regulations
2.2
0
Tools
2.3
0
Lifting
2.4
0
Placing the machine on its side
2.5
1
Opening the wheel cover
2.6
0
Practical hints
3.1
1
Criteria for maintenance
4.1
0
Blade engagement adjustment
4.2
0
Blade brake adjustment
<= ...BACK... <=
