6.10 REPLACEMENT OF THE FRICTION DISCS
FOR CLUTCH DEVICE
The friction discs can lose efficiency if they get dirty
with oil or grease, or if they are accidentally lubrica -
ted by the user, in which case they must be re pla ced.
Lift the wheels cover [see 2.5].
Unscrew the nut (1) and dismantle the pin (2) from the
lever (3). By unscrewing the nut (4), you can take out
the spring (5) and the lever (3).
Loosen the nut (6) so that the sector (7) can slide a -
long and be taken off the square shaft (8) together
with the two friction discs (9) and the two steel discs
(10).
When reassembling, carry out the operations de -
scribed above in reverse order, making sure that the
two tabs of the steel discs are correctly positioned in
the recesses made in the lever (3) and on the support
bracket (11), and ensuring that the sector (7) is
pushed down on the shaft (8) untill the recommended
distance of 57 - 57.5 mm is achieved.
When fully assembled …
Adjust the release rod [see 4.4.B].
Adjust the spring [see 4.4.C].
Close up the wheels cover [see 2.5].
Tightening torque
6
Drive lever sector nut ........................ 10 ÷ 15 Nm
3/2002
72FL hydro
6.10
.
0 -
REPLACEMENT OF THE FRICTION DISCS
FOR CLUTCH DEVICE
1 / 1
쑮
쑮
쑱
쑱
WORKSHOP MANUAL
pag.
MODEL YEAR 2016
© by GLOBAL GARDEN PRODUCTS
6
7
8
9
10
10
11
2
1
5
4
3
8
7
11
10
9
9
10
57-57,5 mm
<= ...BACK... <=
