© by GLOBAL GARDEN PRODUCTS
72FL hydro
1.1
.
0
IDENTIFICATION AND PROCEDURES
1 / 1
쑮
쑮
쑱
쑱
WORKSHOP MANUAL
pag.
MODEL YEAR 2016
1.1 IDENTIFICATION AND PROCEDURES
A) Identification
1) Machine
Each machine has a label attached
(1)
under the dri -
ver’s seat which shows the technical specifications,
the model and the serial number.
The model and serial number must be shown on
e ach repair sheet when requests are made un der
guarantee, and are indispensable for spare part
orders.
2) Transmission (Rear axle)
The transmission unit (both mechanical and hydro-
static) is made up of an engine block including the
rear axle. This unit is made by another manufacturer
to our precise technical specifications which differ-
entiate it from similar items by this same Manufac-
turer.
The serial number on the label (2) clearly identi-
fies the product and its specifications. This num-
ber must always be quoted when requesting spa -
re parts or any information from the Manu facturer.
3) Engine
The engine is made to precise technical specifications
which differentiate it from similar items by this sa me
Manufacturer.
The serial number on the label clearly identifies
the product and its specifications. This number
must always be quoted when requesting spare
parts or any information from the Manufacturer.
B) Guarantee validity
The guarantee is supplied under the terms and the
limits of the contractual relations in being. As far as the
engine and the transmission unit are concerned, the
conditions given by their respective manufacturers ap-
ply.
C) Service repairs after guarantee period
The Service Centre has to make out a report con-
taining the machine’s serial number, a summary of the
problem, the repairs carried out and any spare parts
used for each repair done on the machine.
A copy of this report must be retained to be made avail-
able to the Manufacturer together with the parts in case
of any subsequent disputes with Customers.
D) Fault notification
The Manufacturer welcomes any notifications of faults
that recur with particular frequency. It gives the opportu-
nity for a careful inspection of the problem and the im-
plementation of corrective action at production level.
Similarly, the Manufacturer will notify of any faults dis-
covered on the machines produced, with recommenda-
tions for the most suitable procedures for their remedy.
E) Spare parts request
When requesting spare parts, the code number must be
given, referring to the exploded charts for the year of
manufacture, shown on the identification label
[
point A].
3/2015
2
1
<= ...BACK... <=
