Global American 3307800 User Manual Download Page 89

Page: 89 / 135

3307800

Page 74

5.2 Installation Considerations

NOTE:

The following installation notices and installation considerations should

be read and understood before the 3307800 is installed. All installation

notices pertaining to the installation of the 3307800 should be strictly

adhered to. Failing to adhere to these precautions may lead to severe

damage of the 3307800 and injury to the person installing the

motherboard.

5.2.1 Installation Notices

WARNING:

The installation instructions described in this manual should be carefully

followed in order to prevent damage to the 3307800, 3307800 components

and injury to the user.

Before and during the installation please

the following:

Read the user manual:

The user manual provides a complete description of the 3307800

installation instructions and configuration options.

Wear an electrostatic discharge cuff (ESD):

Electronic components are easily damaged by ESD. Wearing an ESD cuff

removes ESD from the body and helps prevent ESD damage.

Place the 3307800 on an antistatic pad:

When installing or configuring the motherboard, place it on an antistatic

pad. This helps to prevent potential ESD damage.

Turn all power to the 3307800 off:

Summary of Contents for 3307800








































































































































Search results

Summary of Contents for 3307800

Reviews:

Related manuals for 3307800

Brands by name

Popular brands

Global American 3307800, User Manual

Search results

Summary of Contents for 3307800

Reviews:

Related manuals for 3307800

Brands by name

Popular brands