Global American 3307800 User Manual Download Page 130

Page: 130 / 135

3307800

Page 115

D.1 Introduction

The AMD SB600 SATA RAID control can control serial ATA (SATA) disks and increase the

data read/write speed and provide protection to data by distributing mirrored duplicates of

data onto two disk drives (RAID 1).

CAUTION!

A configured RAID volume (which may consist of multiple hard drives)

appears to an operating system as a contingent storage space. The

operating system will not be able to distinguish the physical disk drives

contained in a RAID configuration.

D.1.1 Precautions

One key benefit a RAID configuration brings is that a single hard drive can fail within a

RAID array without damaging data. With RAID 1 array, a failed drive can be replaced and

the RAID configuration restored.

WARNING!

Irrecoverable data loss occurs if a working drive is removed when trying

to remove a failed drive. It is strongly recommended to mark the

physical connections of all SATA disk drives. Drive locations can be

identified by attaching stickers to the drive bays. If a drive member of a

RAID array should fail, the failed drive can then be correctly identified.

Summary of Contents for 3307800








































































































































Search results

Summary of Contents for 3307800

Reviews:

Related manuals for 3307800

Brands by name

Popular brands

Global American 3307800, User Manual

Search results

Summary of Contents for 3307800

Reviews:

Related manuals for 3307800

Brands by name

Popular brands