manualshive.com logo in svg

Global American 3307800, User Manual, Page: 30 / 135

Share
Download
Global American 3307800 User Manual Download Page 30

 

 

3307800 

Page 15 

 

Figure 2-5: PCI Golden Finger Connection 

2.5.4 USB Controllers   

The ATI SB600 on the 3307800 supports up to ten high-speed, full-speed or low-speed 

USB devices. High-speed USB 2.0, with data transfers of up to 480MB/s, is enabled with 

the ATI SB600 integrated Enhanced Host Controller Interface (EHCI) compliant host 

controller. USB full-speed and low-speed signaling are enabled with the integrated 

Universal Host Controller Interface (UHCI) controllers. 

Six of the ten USB ports are implemented on the 3307800 CPU card. The remaining four 

USB ports can be implemented on the backplane. The USB controller supports the 

following: 

„

 

USB 1.1 (“Low Speed”, “Full Speed”) and 2.0 (“High Speed”)   

„

 

ACPI S1~S5   

„

 

Legacy keyboard/mouse   

„

 

USB debug port   

„

 

Port disable with individual control   

Summary of Contents for 3307800








































































































































Reviews:

No comments