manualshive.com logo in svg

Global American 3307800, User Manual, Page: 42 / 135

Share
Download
Global American 3307800 User Manual Download Page 42

 

 

3307800 

Page 27 

„

 

IrDa 1.0 and ASKIR protocols 

 

Figure 2-16: COM Connectors 

2.7.4.3 Super I/O Enhanced Hardware Monitor 

The Super I/O Enhanced Hardware Monitor monitors three thermal inputs, VBAT internally, 

and eight voltage monitor inputs. These hardware parameters are reported in the BIOS and 

can be read from the BIOS Hardware Health Configuration menu. 

2.7.4.4 Super I/O Fan Speed Controller 

The Super I/O fan speed controller enables the system to monitor the speed of the fan. One 

of the pins on the fan connector is reserved for fan speed detection and interfaced to the 

fan speed controller on the Super I/O. The fan speed is then reported in the BIOS. 

2.7.4.5 Super I/O Keyboard Controller 

The Super I/O keyboard controller can execute the 8042 instruction set. Some of the 

keyboard controller features are listed below: 

„

 

The 8042 instruction is compatible with a PS/2 keyboard and PS/2 mouse 

„

 

Gate A20 and Keyboard reset output 

„

 

Supports multiple keyboard power on events 

„

 

Supports mouse double-click and/or mouse move power on events 

 

Summary of Contents for 3307800








































































































































Reviews:

No comments