GlideScope Cobalt AVL, User'S Manual And Reference

Page: 45 / 77

GlideScope
®
Cobalt AVL System
User’s Manual 19
Connect to an External Monitor (Optional)
You can connect the Cobalt AVL monitor to a medically-approved external
monitor such as a TV screen by using an HDMI (high-definition multi-media
interface) to DVI cable. Please contact your Verathon Medical Customer Care
Representative for more information.
To connect the Cobalt AVL monitor to an external medical monitor:
1. Connect one end of the video output cable to the HDMI socket
on the back of the Cobalt AVL monitor.
2. Connect the other end of the cable to the medically approved
external monitor with a DVI port.
3. To see the video on the external monitor press the External Video
button. The indicator LED illuminates when the connection is
successful.
Figure 10 Connect one
end of the video output
cable to the HDMI socket
Getting Started
GlideScope Anti-Fog Feature
To ensure optimal results of the anti-fog heating feature on the GlideScope
video laryngoscope, perform the following steps:
1. Prior to use, open the GVL
®
Stat pouch, but do not remove the Stat
from the packaging (to keep the Stat clean until ready for use). With
the Stat still in the package, insert the Cobalt Video Baton into the Stat.
The video baton must be securely seated in the GVL Stat for efficient
heating of the Stat.
2. Turn on the GlideScope monitor to activate the anti-fog heating
feature.
3. After 30 seconds to 120 seconds, the anti-fog feature should be fully
effective, depending on the ambient temperature and humidity where
the equipment is being stored and/or used.
If the GlideScope Video Baton or Stat is stored in cold conditions,
additional warming time may be required for optimal performance of the
anti-fog feature.