GlideScope Cobalt AVL, User'S Manual And Reference

Page: 44 / 77

GlideScope
®
Cobalt AVL System
18 User’s Manual
Connect the Cobalt Video Baton
To connect the video baton to the monitor:
1. Align the arrow on the video
baton cable and the arrow on
the video socket.
2. Insert the cable into the socket.
You will hear a “click” when the
cable is successfully connected.
Note: When disconnecting the
connector cable rotate the black
connector ring.
Warning: If the video baton is
powered on for an extended
period of time it is possible to
exceed 41 °C at the tip of the
baton where the lighting and
camera are located.
Insert the Video Baton into the GVL Stat
To insert the Cobalt AVL Video Baton into the sterile, single-use GVL
®
Stat:
1. Before you slide the baton into the stat, make sure that the logo on
the side of the baton and the logo on the side of the stat are aligned.
2. Slide the video baton into the GVL Stat until it locks into place.
Note: Make sure that you do not insert the video baton backwards.
Figure 8 Insert the video baton
into the stat
Figure 9 Do not insert the video
baton into the stat backwards
Getting Started
Figure 7
Insert
the video baton
cable into the
socket
Black
connector
ring