Section 1 - Installation: Equipment Assembly
.
Remove the 2 inch bung caps on both the A and B
side drums. Install the transfer pump collars into
the bung holes, making sure to lubricate the threads
with vaseline or grease, thus enabling easy removal
when needed.
.
Make sure that the red caps have been removed
from the bottom of the pumps and then slide the
transfer pumps into the collars. Tighten the wing
nuts on the collars, securing the transfer pumps in
place. Loosen the 3/8 in vent plugs on both drums
allowing for ventilation. If using a desiccant dryer on
the A side, install it now.
10.
Remove the metal caps from the material pumps.
Summary of Contents for GUARDIAN A6-6000
Page 25: ...23 REVISION E Section 3 General Information Assembly Drawings 23675 XX Unit Assembly...
Page 26: ...24 REVISION E Section 3 General Information Assembly Drawings 23675 XX Unit Assembly...
Page 32: ...Section 3 General Information Sub Assembly Drawings 30 REVISION D 23450 XX Hybrid Assembly...
