14
Section 1 - Installation: Equipment Assembly
2.
Add extra hose lengths if necessary.
Required Tools:
Opened - end wrenches - 3/4 in.
a.
Lay hoses out straight.
b.
Couple hoses together with supplied union fittings
and tighten finger-tight.
c.
•
Hold crimp fitting hex (3/4 in.), and union fitting
together, allowing the hose to hold its natural
line.
•
Using 3/4 in. wrenchs to tighten swivel fitting to
union, not allowing crimp fitting or union to turn.
Repeat on opposite side of union.
This practice is required on all connection
points.
1) Hose and machine
2) Hose and gun
3) Adding additional hose sections
Summary of Contents for GUARDIAN A6-6000
Page 25: ...23 REVISION E Section 3 General Information Assembly Drawings 23675 XX Unit Assembly...
Page 26: ...24 REVISION E Section 3 General Information Assembly Drawings 23675 XX Unit Assembly...
Page 32: ...Section 3 General Information Sub Assembly Drawings 30 REVISION D 23450 XX Hybrid Assembly...