10
Section 1 - Installation: Equipment Assembly
11.
Connect one end of each material hose to the inlet
fittings located on the back of the machine.
It is
highly recommended that you label the (POLY)
hose with BLUE tape and the (ISO) hose with RED
tape to ensure that you don’t put the wrong transfer
pump in the opposite material drum.
12.
Connect the other end of the material hoses to
there correct transfer pumps. Ensure that they
are not reversed and tighten securely.
POLY
Material
Drum
Summary of Contents for GUARDIAN A6-6000
Page 25: ...23 REVISION E Section 3 General Information Assembly Drawings 23675 XX Unit Assembly...
Page 26: ...24 REVISION E Section 3 General Information Assembly Drawings 23675 XX Unit Assembly...
Page 32: ...Section 3 General Information Sub Assembly Drawings 30 REVISION D 23450 XX Hybrid Assembly...
