GlammFire.
PAG./19
Pass the hose and the electronic cable through the hole in the box and connect them in the respective orifices, located
near the tank(Figura 13).
Attach the hose to the available connection in the pump
displaced filling system, using the serrated clamp provided
(Figura 8).
Make the connection of the electronic cables to the
ceramic connector, respecting the colours of existing
wires (red/red; black/black) (Figura 15).
Note
: If the hose and the electronic cable are too long (10m), you can reduce it, cutting them to the desired extent.
Thus use the supplied terminals and stick them in the electronic cable wires.
Figura 13
—Hose (ou pipe) and Cable Connection
Figura 14
—Hose connection
Figura 15
—Electrical connection