GlammFire.
PAG./37
6.4—Turn on
After selecting the power supply source, the system turns on, appearing immediately the following information on the
display:
1.
“Start”
2.
“Bt □” - battery charge status
3. “Et □” - Bioethanol level
Next, click on the
"ON"
button on the display / remote control for 2 seconds.
However, in case there is the information "Please Close Door", you should close the door of the tank zone. After the
door closed, the following information appears on the display:
4.
“Checking Tank”
5.
“Tank Ok”
At a later time, the system emits one beep, signalling that the tank door is locked, and the system is ready to start
lighting.
6.
“Ref. Ramp”
7.
“Ignition”
8.
“Maximum” / “Minimum” - combustion level
The Crea7ionEVO PLUS is always working at maximum level. If you want that it works at the minimum level, you must
click on the "-" button on the remote control or, at the same time, the buttons
"I"
+
"O"
on the display.
