GlammFire Crea7ionEVO PLUS 1200 Instruction Manual Download Page 47

Page: 47 / 52

GlammFire.

PAG./47

INFORMATION

DISPLAYED

CAUSE

PROCEDURE

High Voltage!

Battery or charger with high volt-
age.

Check if the battery or charger are
suitable for the Crea7ionEVO
PLUS.

Fire Stopped

The ignition process has been in-
terrupted by the user.

The system returns to standby
mode.

Restart the Crea7ionEVO PLUS

Error Fire Out

Fire extinguished during normal
operation

Remove the error pressing the
“OFF” button until hearing a bip.
Restart the Crea7ionEVO PLUS.

ETHANOL EXCEDED

Too much bioethanol was de-
tected in the combustion line dur-
ing operation.

Please contact a qualified techni-
cian.

Error Sens Ethn Exc

Short circuit sensor excessive
level.

Please contact a qualified techni-
cian.

No display informa-
tion appears

Excessive temperature

Lack of battery

No electrical connection

Check ventilation. It may be insuf-
ficient and may be causing inter-
nal overheating;

Check the battery charge in use. It
may be completely discharged
without any power;

Check if the power adapter is cor-
rectly connected.

Summary of Contents for Crea7ionEVO PLUS 1200





















































Search results

Summary of Contents for Crea7ionEVO PLUS 1200

Reviews:

Related manuals for Crea7ionEVO PLUS 1200

Brands by name

Popular brands

GlammFire Crea7ionEVO PLUS 1200, Instruction Manual

Search results

Summary of Contents for Crea7ionEVO PLUS 1200

Reviews:

Related manuals for Crea7ionEVO PLUS 1200

Brands by name

Popular brands