GlammFire.
PAG./43
8—Display messages
All error messages that may appear on the display are listed in the table below.
INFORMATION
DISPLAYED
CAUSE
PROCEDURE
Burner Is
Hot
The combustion fire line is at a
temperature above the safety
value.
Wait about 5 – 10 minutes until
the combustion fire line has
cooled.
Door is
Locked
The tank door was locked by the
servo motor.
The tank door is locked because
the combustion line is hot.
Wait about 5 – 10 minutes until
the combustion fire line has cool
and the door is open, thus allow-
ing access to the tank.
Door
Unlocked
The tank door was unlocked by
the servo motor.
The system is at the ideal tem-
perature.
You can now access the tank.
Low Bat.
Low-battery warning.
Change the battery for the second
battery supplied, which should be
properly recharged, and recharge
the battery removed.
Bt
The system indicates the battery
charge status.
If you do not want to use the sys-
tem, turn it off using the ON/OFF/
ON button, in order to save en-
ergy.
Start
The Crea7ionEVO PLUS is ready to
start the operation process.
Press the "ON" button to put the
system into operation.
If you do not want to use the sys-
tem, turn it off using the ON/OFF/
ON button, in order to save en-
Checking
Tank
The software is checking the bio-
ethanol level in the tank.
Check the existing bioethanol in
the tank and fill it if necessary.
