Do not use water to extinguish the fire;
Do not use chemical products to clean the fireplace, as they may damage the materials. When in doubt contact an
authorized dealer;
After flame cutting may remain small residual flames at the point of fuel inlet for approximately 2 to 10 minutes. At
the end of this time the flame will extinguish naturally;
If bioethanol pours out during the process of filling up the tank, clean the tank and surrounding area, before using
again;
Decorative stones, wood or other accessories should not be placed directly on top of the burning area. Should you
use decorative accessories make sure:
The accessories do not interfere with the flame;
Are only for decorating the fireplaces and combustion fires;
There is no risk of falling inside the combustion fire.
GlammFire.
PAG./6