Giona Holding Futura 100 TS, Instructions For Installation, Use And Maintenance Manual

Page: 33 / 48

Heat pump water heater
- 33 -
EN
2.6 Technical data table
Magnitudes Unit HP100
Rated tank capacity l 100
Average insulating coating thickness
mm 37
Inner protection type Glass porcelain lining applied using the flow-coating
method (850°C)
Maximum operating pressure MPa 0.6
Minimum operating pressure (***) MPa 0.05
Water connector diameter “ G½
Condensation drain connector mm 13
Loadless weight kg 56
Maximum usage temperature °C 95
Heat pump
Thermal power (*) W 900
Input power (*) W 300
COP (*) 2.6
Heating time (*) h:m 5:22
Maximum water temperature °C 56
Minimum water temperature °C 10
Refrigerating fluid type R134a
Amount of refrigerating fluid kg 280
Maximum input power W 2400
Water heating element
Electric power W 1200
Maximum water temperature with
resistance °C 65
Air heating element
Electric power W 900
Power supply
Voltage / maximum input power (*) V / W 230 / 2400
Frequency Hz 50
Protection degree IPX2
Air side
Air flow rate m 3 /h 80
Minimum volume of the installation room
(**) m 3 20
(*) Values measured with an air temperature of 20°C, a relative humidity of 70% and an input water temperature of 15°C ( as provided for by UNI EN 16147).
(**) When not using the Comfort feature.
(***) Verify that the boiler is full. Install the equipment as prescribed in these instructions.
(****) Values measured at an atmospheric pressure of 1019 hPa.
(*****) Inlet water max. temperature 30°C