GB
23
Filter assembling
FLOW DIRECTION
Suction Pump
Inlet
Jar Air Tube
The device features an energy saving function which allows the device to increase its autonomy and decrease the number of revs of
the motor. In order to do so, it controls the negative pressure which is generated only when the operator suctions body fluids.
If the operator does not carry out the suction process the device lowers the number of revs of the motor, thus protecting the
duration of the internal battery.
NEVER USE THE DEVICE WITHOUT JAR AND / OR PROTECTION FILTER
Operation using cigarette lighter DC 12V
Connect the device’s external plug 12V to the ligther plug with the cigarette lighter cable. Check the battery power status of
the vehicle before the cigarette lighter cable. Press the switch to start suction
Press the switch to the
I
position to turn it on.
WARNING
:
Only use the originally supplied or recommended replacement cigarette ligther cables (view the chapter
“Important Safety Rules”)
WARNING:
Before using the device, check the battery power status. Before each use proceed with charging the
battery. To maintain the device in good conditions, recharge the battery every 3 months (when not in use).
IN / Fluid Inside
IN
switch
“Proximity”
switch
ON / OFF
Adjustment
button
depression
“+”
sensor
“Proximity”
LCD
display
Adjustment
button
depression
“-“