![background image](http://html1.mh-extra.com/html/gima/supervega-evo-battery-aspirator/supervega-evo-battery-aspirator_instruction-manual_2228101004.webp)
GB
19
SYMBOLS
Insulation Class II (when used with AC / DC adapter or when connected
to a car cigarette lighter cable)
CE marking in conformity with EC directive 93/42/CEE and subsequent
changes
General warnings and/or specifications
Consult the instruction manual
Manufacturer:
Gima S.p.A.
Via Marconi, 1 - 20060 Gessate (MI) Italy
Applied Part type BF (suction probe)
Keep in a cool, dry place
Conservation temperature
Atmospheric Pressure
Battery (Li-Ion Battery 14,8V
5.2A)
Direct Current
ON / OFF
Batch production
Serial number
Model / Ref number
Device approved according to international standards ECE-R10
IP21
Degree of protection an electrical device provides in the case of
accidental or intentional contact with the human body or with objects,
and protection in the case of contact with water.
1st DIGIT
PENETRATION OF SOLIDS
2nd DIGIT
PENETRATION OF LIQUIDS
Protected against solids having a
dimension greater than Ø 12mm
Protected against the vertical
flow of drops of water
DISPOSAL OF WASTE BATTERIES - (Directive 2006/66/EC)
This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be
treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially
negative consequences for the environment and human health which could otherwise be caused by inappropriate
waste handling of the battery. The recycling of the materials will help to conserve natural resources.
At the end of their life hand the batteries over to the applicable collection points for the recycling of waste
batteries. For more detailed information about recycling of this product or battery, please contact your local Civic
Office, your household waste disposal service or the shop where you purchased the product.
CLEANING DEVICE
Use a soft dry cloth with not – abrasive and not – solvent detergents. To clean the device external parts always use a cotton cloth
dampened with detergent. Don’t use abrasive or solvent detergents.
PARTICULAR CARE SHOULD BE TAKEN TO ENSURE THAT THE INTERNAL PARTS OF THE EQUIPMENT DO
NOT GET IN TOUCH WITH LIQUIDS. NEVER CLEAN THE EQUIPMENT WITH WATER.
During all clearing operations use protection gloves and apron (if need be, also wear a face mask and glasses) to avoid getting in
contact with contaminating substances (after each utilization cycle of the machine).
10R-041439