31
ENGLISH
3.
If this monitor is stored near freezing, allow it to acclimate to room
temperature before use.
4.
Do not attempt to disassemble this monitor.
5.
If you do not use the monitor for a long time, please remove the
batteries.
6.
It is recommended the performance should be checked every 2 years
or after repair. please contact the service center.
7.
Clean the monitor with a dry, soft cloth or a soft cloth squeezed well
after moistened with water, diluted disinfectant alcohol, or diluted
detergent. 8. no component can be maintained by user in the monitor.
the circuit
diagrams, component part lists, descriptions,
calibration instructions,
or other information which will
assist the user’s appropriately qualified
technical personnel
to repair those parts of equipment which
are designated
repairably can be supplied by us.
9.
the monitor can maintain the safety and performance
characteristics
for a minimum of 10,000 measurements or
three years, and the cuff integrity is maintained after 1,000 open
–close
cycles of the closure.
10.
It is recommended the cuff should be disinfected 2 times
every week if needed (for example, in hospital or in clinique). Wipe the
inner side (the side contacts skin) of the cuff by a soft cloth squeezed
after
moistened with Ethyl alcohol (75-90%), then dry the cuff by
airing.
explanatIon of SymBolS on unIt
Symbol for “tHE opEratIon gUIDE mUSt bE rEaD”
(the sign background colour: blue.the sign graphical symbol: white)
Symbol for “WarnIng”
Symbol for “tYpE bf appLIED partS”
(the cuff is type bf applied part)
Symbol for “EnVIronmEnt protECtIon - Waste electrical
products should not be disposed of with household waste.
please recycle where facilities exist. Check with your local
authority
or reta
iler for recycling advice”
Symbol for “manUfaCtUrEr”
0197
Symbol for “CompILES WItH mDD93/42/EEC rEQUIrEmEntS”
Symbol for “DatE of manUfaCtUrE”
Symbol for “EUropEan rEprESEntatIon”
Sn
Symbol for “SErIaL nUmbEr”
Symbol for “KEEp DrY”