28
ENGLISH
b.
If the monitor has stored results, the LCD will momentarily
display the most recent one. If no result
has been
stored, zero will appear on LCD.
c.
If the voice function is switched on, the
monitor will speak out measurement tips.
d.
then the monitor inflates the cuff until
sufficient
pressure has built up for a measurement.
then the monitor slowly releases air from
the cuff and carries
out the measurement.
finally the blood pressure and pulse rate will be calculated and
displayed
on the LCD screen. the blood pressure classification indicator
and Irregular heartbeat symbol (if any) will blink on
the screen. If the voice function is on, it will announce the
measurement
result. the result will be automatically
stored in the monitor.
e.
after measurement, the monitor will turn off
automatically after
1 minute of no operation. alternatively,
you can press
the “Start” button to turn off the monitor manually.
f.
During measurement, you can press the “Start” button to turn
off
the monitor manually.
Note
: please consult a health care professional for interpretation of pressure
measurements.
8. displaying stored results
a.
In Clock mode, press “mEm” button, the
last result will be displayed with date and time.
Irregular
heartbeat symbol (if any) and the indicator
of blood
pressure classification will blink at the same
time.
press “mEm” button repeatedly to review
the
results measured previously.
b.
If the voice function is on, the monitor will
announce each result in the memory.
c.
When displaying the stored results, the monitor will turn off
automatically
after 2 minutes of no operation. You can also
press the button “Start”
to turn off the monitor manually.