GIMA SpA
DIATERMO MB202
Manuale d’istruzioni / Instruction’s Manual
MA160IGBb
30
4.11 BACK PANEL
1 Equipotential binding
2 Connector for pedal
3 Voltage selector
4 Mains voltage connector
4.11.1
P
OWER
S
UPPLY
M
ODULE
Power supply module is the connection point of mains voltage feeding to the unit. This module is provided with line fuses.
WARNING:
before switch on the unit, operator has to verify that requested mains voltage corresponds to the voltage available
from the electrical net.
4.11.2
P
EDAL
C
ONNECTOR
On the left part of the back panel it is pedal connector.
4.11.3
T
URNABLE
V
OLTAGE
S
ELECTOR
On the power supply block can be present a voltage selector suitable for the selection of 115V
~
or 230V
~
mains voltage.
Before powering the unit, it is necessary to preset the correct mains voltage by properly set the voltage selector. The unit is
factory preset to 230V
~
.