17
ENGLISH
AdultCuff:
(Specification: limb circumference 22-32
cm
(middle part of upper arm ),
please choice suited
cuff when measuring other.)
User Manual
Separate Sale:
AC Adapter
Input: voltage: AC 100 V~240 V
frequency: 50
Hz/60 Hz
Rated current: AC 150 mA
Output:DC5.0 V±0.2
V 1.0
A
Cuff:
Extra large adult Cuff: the range of limb circumference is
32
-
43 cm (middle part of upper arm)
Note:
◎
The cuff is a consumable. Calculate by measuring 6 times a day(3 times each morning and evening), the service life of the cuff is about 1 year.(using
our experimental conditions);
◎
In order to correctly measure blood pressure, please replace the cuff in time;
◎
If the cuff leaks, please contact our company to buy a new one. The cuff purchased separately does not include the airway tube plug. When replacing,
please do not throw the airway tube plug away, install it on the new cuff.
Note
When the product and accessories described in this manual are about to exceed the period of use, they must be disposed according to relevant product
handling specification. If you want to know more information, please contact our company or representative organization.
CHAPTER 4 - EXTERNAL INTERFACES
Note
When removing NIBP cuff, please take plug at the front of the windpipe to pull out.
① Cuff socket(
is cuff identifier) Left side
②Power adapter socket(
is power socket identifier)
Back side
Note
All analog and digital equipment connected to this device must be certified to IEC standards(such as IEC60950: Information technology equipment-Safety
and IEC60601-1: Medical electrical equipment-Safety), and all equipment should be connected to in accordance with the requirement of the valid version
of the IEC60601-1-1 system standard. The person connecting the additional equipment to the signal input and output port is responsible for whether the
system complies with the IEC60601
-
1 standard.
CHAPTER 5 - BATTERY/AC ADAPTER
INSTALLATION
The production can use battery and AC adapter.
5.1 Battery Installation
① ② ③
① Demount the battery cover in the direction of the arrow.
② Install “AA” batteries according to
polarities.
③ Slide to close the battery cover.
Icon “
”: the batteries power will exhaust. Replace with four new batteries (the same sort) at the same time. Test while low power may
cause data deviation and other problems.
Turn the unit off before replacing the batteries.
Note
When the battery reaches the end of its life, or if the battery is found to have odor, deformation, discoloration or distortion, stop using the
battery and dispose of the used battery in accordance with local regulations, otherwise it will cause environmental pollution.
5.2 Usage of power adapter
1.Connect the sphygmomanometer and the power adapter. Plug the power adapter plug into the power adapter socket on the back of the device
2.Please insert the power plug of the adapter into the AC 100 V~240 V socket.
Note
The device can be disconnected from the power supply network by unplugging the adapter plug.
