background image

16

ENGLISH

After pressing the power button, if the device has display fault such as white screen, blurred screen or no display content, please contact our 

company.

The device shall comply with the standard IEC 80601-2-30:Particular requirements for basic safety and essential performance of automated non-

invasive sphygmomanometers

.

2.1 Operation for power adapter(Separate Sale)

 Note 

The device can be powered by a power adapter that is a part of the medical electrical system.Be sure to use the dedicated medical grade power 

adapter of this device.

Otherwise it may cause trouble

Dedicated power adapter must use AC 100 V~240 V

Otherwise it may cause fire or electric shock.

When there is breakage of dedicated power adapter plug or wire, please do not use it.

Otherwise it may cause fire or electric shock.

Please do not plug or unplug the adapter on the socket with wet hands.

Otherwise it may cause electric shock or injury.

When  using the  power  adapter to connect  with the  power  socket,  make  sure  the  power  socket  is conveniently accessible,  in order  to timely 

disconnect from the power when emergency.

2.2 Operation for Battery

 

 Note 

Please use 4 “AA” size manganese or alkaline batteries, do not use batteries of other types.

Otherwise it may cause fire.

Do not mix old and new batteries and batteries of different types

Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic Sphygmomanometer.

Please don't put wrong the positive and negative of battery. When the batteries power exhausts, replace with four new batteries at the same time.

Please take out the batteries when you do not use the device for a long time(3 months or more).

Otherwise it may cause battery leakage, heat, rupture, and damage to Electronic Sphygmomanometer.

If electrolyte of the batteries immodestly get in your eyes, immediately rinse with plenty of clean water.

It will cause blindness or other hazards, should immediately go to the nearest hospital for treatment

.

If electrolyte of the batteries immodestly glues on the skin or the clothes, immediately rinse with plenty of clean water.

Otherwise it may hurt the skin.

Advice

Do not strike or drop the device;

Do not inflate before the cuff wraps around the arm;

Do not inflect the cuff and the air tube forcibly.

The device applies measurement Blood Pressure (BP) and Pulse of adult .

CHAPTER 3 - MAIN UNIT

All products are in the box. Open the box and confirm whether the product is whole.

Cuff Plug

Cuff Air Plug

Adult Cuff

MEMORY Button

START/STOP Button

Dry Battery

Display

Summary of Contents for 49880














Reviews: