AT LEAST TWO PEOPLE ARE REQUIRED WHEN INSTALLING THE WHEEL KITS.
WHEEL KITS COME FULLY ASSEMBLED. TURN JACK CRANK ALMOST TO ITS SHORTEST POSITION BEFORE INSTALLATION.
42. LOCATE THE CENTER OF THE UPRIGHT FRAME YOU ARE MOUNTING THE WHEEL KIT TO.
REFER TO WHEEL KIT LOCATION CHART ON NEXT PAGE.
43.
CRANK JACK ABOUT FOUR FULL TURNS DOWN BEFORE MARKING HOLE LOCATIONS
. WITH THE WHEELS NOW
SLIGHTLY EXTENDED, HOLD THE ASSEMBLED WHEEL AGAINST THE SIDING WITH THE MOUNTING PLATE PARALLEL
TO THE SIDING FACE.
44. MARK THE MOUNTING PLATE HOLES ONTO THE SIDING, REMOVE WHEEL KIT AND DRILL 9/16" HOLE.
45. INSTALL WHEEL KITS AS SHOWN BELOW.
NOTE:
DRIVE ONE 1" SELF DRILLING SCREW (HDWE06267) INTO EACH CLAMPING PLATE TO PREVENT WHEEL
KIT FROM SLIPPING. REFER TO WHEEL KIT LOCATION CHART FOR WHEEL KIT LOCATIONS.
DETAIL CY
SIDING HIGH
SPOT
WHEEL BRACKET
SIDING SPACER
www.gillathletics.com
Copyright
2017 by Gill Athletics.
All rights reserved.
800-637-3090
10/1/2020
INST881018
Page 30 of 36
881018, 881425, 882120, 883022
PIT GARAGE ASSEMBLY INSTRUCTIONS
MOUNTING PLATE
HDWE030030E0
HDWE040030E0
HDWE050050E0
884005
HDWE011780E0
SIDING HIDDEN
FOR CLARITY
HDWE06267
HDWE06267
CY
JACK IN SHORTEST
POSITION
JACK IN UP
POSITION
