GILL RECOMMENDS AT LEAST TWO PEOPLE WHEN SKINNING THE GARAGE.
25. CUT TWO 10" STRIPS OF SIDING FOR THE LEFT AND THE RIGHT BOTTOM CORNERS. SLIDE EACH
PIECE INTO THE SIDING CHANNEL AND TUCK IT UNDER THE PREVIOUSLY CUT PIECE ABOVE. FASTEN
USING 1" SELF DRILLING SCREWS.
26. PLACE A SHEET OF SIDING ONTO THE RECESSED FRAME OF THE DOOR(S) AND HOLD IN PLACE. SLIDE THAT
PIECE ALL THE WAY TO ONE SIDE OF THE DOOR FRAME. ADD THE SECOND PIECE ON TOP OF THE FIRST
AND SLIDE TO THE OPPOSITE SIDE OF THE FRAME. FASTEN DOWN USING 1" SELF DRILLING SCREWS.
NOTE:
GILL RECOMMENDS TWO PEOPLE FOR THIS STEP. CUTTING THE SECOND PIECE OF SIDING IS
OPTIONAL.
USE EXTREME CAUTION WHEN CUTTING SIDING
TO PREVENT CUTS OR OTHER INJURIES.
www.gillathletics.com
Copyright
2017 by Gill Athletics.
All rights reserved.
800-637-3090
10/1/2020
INST881018
Page 20 of 36
881018, 881425, 882120, 883022
PIT GARAGE ASSEMBLY INSTRUCTIONS
