www.gillathletics.com
Copyright
2017 by Gill Athletics.
All rights reserved.
800-637-3090
10/1/2020
INST881018
Page 12 of 36
881018, 881425, 882120, 883022
PIT GARAGE ASSEMBLY INSTRUCTIONS
INSIDE VIEW
HDWE06267
88415
HDWE06267
ADD ADDITIONAL SCREW HERE AFTER
ATTACHING BOTH ENDS
USE HDWE06267
NOTE:
USE A LEVEL OR A SQUARE TO MAKE SURE LEFT AND RIGHT FRONT CORNER WELDMENTS ARE SQUARE TO
THE BOTTOM OF THE FRONT TRUSS BEFORE ADDING THE DIAGONAL FRONT BRACES.
DO NOT ADD DIAGONAL BRACES
TO THE OUTSIDE OF GARAGE
; SIDING WILL NOT LAY FLAT IF INSTALLED ON OUTSIDE.
17. INSTALL DIAGONAL FRONT BRACES USING TWO 1" SELF DRILLING SCREWS TO THE INSIDE OF THE GARAGE.
BRACES ONLY HAVE TWO PRE-DRILLED HOLES.
18. USE TWO MORE 1" SELF DRILLING SCREWS AS DEPICTED BELOW.
