HDWE050030E0
1/4" FLAT WASHER
DETAIL V
FLAT HEAD SCREW
HDWE060100E0
M1290
1/4" NYLOCK NUT
NOTE:
THE "NUT" SIDE OF THESE
CONNECTIONS MUST POINT
TOWARDS EACH OTHER.
www.gillathletics.com
Copyright
2017 by Gill Athletics.
All rights reserved.
800-637-3090
10/1/2020
INST881018
Page 10 of 36
881018, 881425, 882120, 883022
PIT GARAGE ASSEMBLY INSTRUCTIONS
AT LEAST TWO PEOPLE ARE REQUIRED WHEN ADDING ALL TRUSS ASSEMBLIES.
NOTE:
HAVE THE HARDWARE READY BEFORE PUTTING THE ASSEMBLED TRUSSES IN PLACE.
12. LOWER REAR TRUSS ASSEMBLY IN PLACE. FASTEN THE TRUSS USING TWO 1/4" FLAT HEAD SCREWS, FOUR
1/4" FLAT WASHERS AND TWO 1/4" NYLOCK HEX NUTS.
13. LOWER FRONT TRUSS ASSEMBLY IN PLACE. FASTEN THE TRUSS USING TWO 1/4" FLAT HEAD SCREWS, FOUR
1/4" FLAT WASHERS AND TWO 1/4" NYLOCK HEX NUTS.
THE STRUCTURE IS NOW ABLE TO STAND ON ITS OWN.
FRONT TRUSSES
STANDARD TRUSSES
(REAR AND INSIDE)
U
V
HDWE050030E0
DETAIL U
M1290
HDWE060100E0
FLAT HEAD SCREW
