AT LEAST TWO PEOPLE ARE REQUIRED WHEN ATTACHING DOORS.
19. ATTACH HINGES AS SHOWN BELOW USING #10 X 3/4"SELF DRILLING FLAT HEAD SCREWS. SCREW HINGE TO THE
UNDERNEATH SIDE OF FRONT TRUSS. OPEN HINGE AS SHOWN IN
DETAIL CT
FOR CORRECT FRONT AND BACK
LOCATION.
20. WHILE AT LEAST ONE PERSON HOLDS THE DOOR IN THE OPEN POSITION ATTACH OPEN SIDE OF HINGE TO
THE DOOR FRAME.
NOTE:
MAKE SURE THERE IS A 1" GAP BETWEEN CORNER FRAME AND DOOR FRAME AS WELL AS BETWEEN
EACH DOOR (IF TWO DOORS ARE PRESENT) REFER TO NEXT PAGE FOR HINGE LAYOUT FOR YOUR GARAGE.
HDWE06270
#10 FLAT HEAD
SELF DRILLING SCREW
FRONT TRUSS
www.gillathletics.com
Copyright
2017 by Gill Athletics.
All rights reserved.
800-637-3090
10/1/2020
INST881018
Page 14 of 36
881018, 881425, 882120, 883022
PIT GARAGE ASSEMBLY INSTRUCTIONS
DOOR
FRAME
CORNER
FRAME
1"
12"
HDWE60003
HINGE
OPEN
HINGE
DETAIL CT
FRONT
TRUSS
