NOTE:
DO THE FOLLOWING
WHEN INSTALLING SHORT TRIM ANGLES. HOLD EACH ANGLE (ONE BY ONE) AGAINST
THE GARAGE CORNERS. MARK THE SPOT TO PRE-DRILL FOR THE 2" SELF DRILLING SCREWS. BE SURE TO MAKE
THOSE MARKS ON LOW SPOTS. DRILL 1/4" HOLES CENTERED (DOWN THE LENGTH OF THE ANGLES) AND INSTALL
ANGLES AS SHOWN IN
DETAIL BW
.
35. ATTACH THE SHORTER OF THE TWO WHITE ANGLES TO EACH CORNER OF THE GARAGE. FASTEN USING
SIX 1" SELF DRILLING SCREWS AND PLASTIC SPACERS.
NOTE:
PLASTIC SPACERS ARE USED
ON THE LOW SPOTS TO PREVENT
THE HIGH SPOTS FROM CRUSHING IN.
www.gillathletics.com
Copyright
2017 by Gill Athletics.
All rights reserved.
800-637-3090
10/1/2020
INST881018
Page 25 of 36
881018, 881425, 882120, 883022
PIT GARAGE ASSEMBLY INSTRUCTIONS
BW
1/4" PRE-DRILLED
HOLE
HDWE06267
HDWE55083
PLASTIC SPACER
LOW SPOT
HIGH SPOT
TRIM ANGLE
ANGLE CENTER
LINE
DETAIL BW
