4
3
www.gillathletics.com
Copyright
2017 by Gill Athletics.
All rights reserved.
800-637-3090
10/1/2020
INST881018
Page 17 of 36
881018, 881425, 882120, 883022
PIT GARAGE ASSEMBLY INSTRUCTIONS
GILL RECOMMENDS AT LEAST TWO PEOPLE WHEN SKINNING THE GARAGE.
21. START ADDING SIDING TO THE LOWER BACK SIDE OF YOUR GARAGE.
NOTE:
THIS MAY REQUIRE CUTTING THE SIDING DOWN THE LONG WAY DEPENDING ON THE SIZE
OF YOUR GARAGE.
USE EXTREME CAUTION WHEN CUTTING SIDING
TO PREVENT CUTS OR OTHER INJURIES.
2
1
22. NEXT, ADD THE UPPER PIECES OF SIDING.
THIS WILL REQUIRE CUTTING THE SIDING. HOLD THE FIRST SHEET TO BE CUT UP TO WHERE IT NEEDS TO
BE INSTALLED. USING A SHARPIE, MARK THE BACKSIDE OF THE SIDING DOWN THE SLOPE AND THE ROUNDED
CORNER. CUT THE PIECE ON THE GROUND AND INSTALL USING 1" SELF DRILLING SCREWS.
NOTE: USE EXTREME CAUTION WHEN CUTTING SIDING
TO PREVENT CUTS OR OTHER INJURIES.
