MDE-2597L Gilbarco® Security Module (GSM) PA0258XXXXXXX Installation and Service Instructions · January 2010
Page 15
Installation
5
Attach either the RJ-45 to DB-9 Cable Adapter (M09747B010) or the Enhanced Dispenser
Hub COM Gender Mender (Q13180-63B) to COM 4 on the Enhanced Dispenser Hub (see
). Q13180-63B will be attached to the Enhanced Dispenser Hub with a
Q13480-XX CAT-5 Cable.
With Passport V8.02 and later, communication to the GSM is through the Enhanced
Dispenser Hub. COM Port 4 of the Enhanced Dispenser Hub has been hard-coded for
communication to the GSM. Port mapping of other serial devices should NOT be done
against COM Port 4.
IMPORTANT INFORMATION
6
Connect the power module to the GSM.
7
Insert the GSM power module outlet cord into the outlet.
Note: Power must be applied to the GSM before it is applied to the Controller.
8
For Q13698-03 power supplies:
• Connect the Q11121-01 Cable to the power supply.
• Plug the cable into the power outlet.
For applications that do not have a NEMA 5-15 style outlet, the customer must supply a
connector and attach it to the end of a Q11736-01 Cable.
9
Turn on power to the Controller.
10
Verify the Passport POS system programming by checking for the following:
• Correct addresses Poll/Cluster/Select.
• Correct number of terminal IDs.
• Correct terminal IDs.
• Correct terminal address.
• Correct device type.
11
Contact the network for verification of parameters and station start up.
12
Observe the CRIND device display.
• If the CRIND device initiation is successful, you see a prompt requesting card insertion on
the display once the start up and initiation are complete.
• If the CRIND device displays OUT OF SERVICE or ONE MOMENT PLEASE, open the
• G-SITE POS system shift.
• If the CRIND device displays PLEASE PAY INSIDE and beeps, it implies that the third-
party controller is not pulling the CRIND device.
13
Using permanent ink marker, write the month, day, and year of installation in block letters on
the front product label (see
on
).
14
Verify correct debit card processing by attempting a debit card transaction at the CRIND
device. Refer to
on
