Introduction
Page 2
MDE-2597L Gilbarco® Security Module (GSM) PA0258XXXXXXX Installation and Service Instructions · January 2010
The network encryption key codes are injected at the factory and the GSM is sealed. The GSM
is not serviceable in the field and must not be opened or disassembled.
If the GSM cover is removed or tampered with, the data inside the GSM will be
destroyed, and the GSM will no longer be usable.
CAUTION
When installing a GSM with a third-party controller, refer to the installation documentation
provided by the third-party supplier.
Parts List
Description
Part Number
Quantity
Gender Mender - 9-pin
(GSM to CAT-5 Cable)
Q13180-04B (Black)
1
Gender Mender - 9-pin
(COM to CAT-5 Cable)
Q13180-20B (Black)*
1
RJ-45 to 9-pin Male Cable Adapter
M09747B010*
1
Gender Mender - 25-pin
(Controller to Modular Cable)
Q13180-22B (Black)
1
GSM
PA0258XXXXXXX
1
GSM Power Supply, 5 V (OUT) or 90-260 VAC (IN)
Q13698-03
1
Modular Cable, 10’
Q13850-10
1
* Not included with the GSM.
CAUTION
Devices such as GSM, Mannatec
®
, Car Wash, Tank Monitor
™
, and Price Sign controllers
will be connected to the Enhanced Dispenser Hub (after Passport V8.02 software upgrade)
through an RS-232 connection. Gilbarco recommends an RS-232 Line Booster for these
devices if the CAT-5 Cable distance (run) is between 50 and 100 feet. If the CAT-5 Cable
distance (run) is greater than 100 feet, an RS-232 Line Booster will be required, along with
an additional booster for every additional 50 feet.
CAUTION
Note: Cables provided with the GSM may not support all third-party controllers. Refer to
third-party documentation for specific cabling requirements.
