Installation
Page 10
MDE-2597L Gilbarco® Security Module (GSM) PA0258XXXXXXX Installation and Service Instructions · January 2010
2
Use the following table to verify if the correct CRIND software is installed.
Controller
CRIND Logic Board
Software Version
Gilbarco POS System
T17361
15.2 or later
T17764
M03651A001, A002
16.0 or later
M04108A001
02.x.x
Third-party
T17361
50.2.4
T17764
M03651A001, A002
51.1.6, 60.x.x, or 62.x.x
M04108A001
02.x.x
3
Position the unit within 10 feet (3.04 m) of an isolated ground outlet and the POS system.
4
Mount the GSM on a wall or shelf, using the unit as a template (do not use the GSM as a drill
guide). Ensure that you can see the LED indicators when the GSM is installed.
5
Turn off power to the Controller.
OFF
